Brother MFC-J2310 Service Manual

5-67
Confidential
AMS01 (Printing assurance 1)
• Selector 1: Prevention of stains on back side of leading edge of paper in borderless printing
Setting this selector to "1" reduces the protruding amount of the leading edge of recording
paper to the platen groove to minimize stains that could be caused by ink mist on the back
side of the leading edge. Enabling this function reduces the throughput than disabling it.
Selector
No.
Function Setting and Specifications
1
Prevention of stains on back side of
leading edge of paper in borderless
printing
0: Disable (default) 1: Enable
2 Not used.
3
4
Protection of platen from no-paper
printing to prevent stains
(Functional restriction on the paper
width sensor)
No. 3 4
0 0 : Enable (Determine the sensor
function depending upon the print
resolution selected) (default)
0 1 : Enable (Detect the leading edge
plus right and left edges of paper)
1 0 : Enable (Detect the leading edge
of paper)
1 1 : Disable (No paper detection)
5
Assurance print 1
(Printing with black and cyan inks in
monochrome copy)
0: Disable (default) 1: Enable
6
Assurance print 2
(Printing with black and cyan inks in
monochrome FAX reception and in list
output)
0: Disable (default) 1: Enable
7
8
Workaround for false jam detection
(Functional restriction on the paper
width sensor)
No. 7 8
0 0 : Detect both the leading edge and
width of paper (default)
0 1 : Detect both the leading edge and
width of paper
1 0 : Detect only the leading edge of
paper
1 1 : No detection

Brother MFC-J2310 Specifications

General

Brand	Brother
Model	MFC-J2310
Category	All in One Printer
Language	English