5-74
Confidential
AMS07 (Printing assurance 5)
• Selector 1: Improvement of displaced ruled lines for A3/ledger/B4 size
Setting this selector to "0" switches to the unidirectional print mode with control enabled
for improving displaced ruled lines, in normal printing of A3/ledger/B4 size plain paper.
• Selector 2: Improvement of displaced ruled lines for A4/letter size
Setting this selector to "1" switches to the unidirectional print mode with control enabled
for improving displaced ruled lines, in normal printing of A4/letter size plain paper.
• Selector 3: Improvement of displaced ruled lines for sizes other than A3/ledger/B4/A4/letter size
Setting this selector to "1" switches to the unidirectional print mode with control enabled
for improving displaced ruled lines, in normal printing of plain paper of sizes other than
A3/ledger/B4/A4/letter size.
• Selector 4: Brother Paper mode
Setting this selector to "1" switches to print with control enabled for enhanced printing
quality, as customized for Brother Paper.
Note: To use AMS07, you need to update firmware to the latest one.
Selector No. Function
Setting and Specifications
1
Improvement of displaced ruled
lines for A3/ledger/B4 size
0: Disable (default) 1: Enable
2
Improvement of displaced ruled
lines for A4/letter size
0: Disable (default) 1: Enable
3
Improvement of displaced ruled
lines for sizes other than A3/
ledger/B4/A4/letter size
0: Disable (default) 1: Enable
4 Brother Paper mode 0: Disable (default) 1:Enable
5
|
8
Not used.
To Next Page
Loading...
Need help?
General
