Confidential
2-18
Code 1 Code 2 Cause
Refer to
page:
32 01
Remote terminal only with V.29 capability in 2,400 or 4,800
bps transmission.
Section
4.9.3
"A
communicat
ions error
occurs"
32 02 Remote terminal not ready for polling.
32 10
Remote terminal not equipped with password function, or
password function switch is OFF.
32 11
Remote terminal not equipped with or not ready for
confidential mailbox function.
32 12
Remote terminal not equipped with or not ready for relay
function.
32 13 No confidential mail in the remote terminal.
32 14
The available memory space of the remote terminal is less than
that required for reception of the confidential or relay broad-
casting instruction.
32 15 Remote terminal not equipped with cipher receiving function.
32 16 Remote terminal not equipped with SEP function.
32 17 Remote terminal not equipped with SUB function.
32 18 Remote terminal not equipped with color function.
40 02 Illegal coding system requested.
40 03 Illegal recording width requested.
40 05 ECM requested although not allowed.
40 06 Polled while not ready.
40 07 No document to send when polled.
40 10 Nation code or manufacturer code not coincident.
40 11
Group number not registered in relay broad-casting
commanded, or commanded total broad-casting number
exceeds maximum broadcast enabled number.
40 12 Retrieval while not in retrieval stand-by.
40 13
Received polling from other maker products during
confidential polling stand-by.
40 14 No common key registration when using common key.
40 15
Red-black receiving requested while red-black receiving is
disabled.
40 16
Cipher communication requested while cipher receiving is
disabled.
40 17 Invalid resolution selected.
40 20 Invalid full-color mode requested.
To Next Page
Loading...
Need help?
General
