Confidential
2-20
Code 1 Code 2 Cause
Refer to
page:
B0 03
Unable to receive polling even during turn-around transmission
due to call reservation.
Section
4.9.3
"A
communicat
ions error
occurs"
B0 04 PC interface error
BF 01
Communication cancelled by depressing stop key before
confirming FAX communication.
BF 02
Communication cancelled by depressing stop key after
confirming FAX communication.
C0 01 No common modulation mode or polling failed.
C0 02 Unable to detect JM.
C0 03 Unable to detect CM.
C0 04 Unable to detect CJ.
C0 10 V. 34 negotiation or training not finished.
C0 11 Modem error detected during V. 34 negotiation or training.
C0 20 Modem error detected during sending of commands.
C0 21 Modem error detected during receiving of commands.
C0 22 Control channel connection time-out.
C0 30 Modem error detected during sending of image signals.
C0 31 Modem error detected during receiving of image signals.
E0 01 Failed to detect 1,300 Hz signal in burn-in operation.
E0 02 Failed to detect PB signals in burn-in operation.
E0 03 Command not detected from RS232C in burn-in.
To Next Page
Loading...
Need help?
General
