Confidential
2-22
Error Code 13
Defective during duplex-printing
Registration sensor detects paper feed condition at out of specified timing during switchback.
User Check
- Check whether the recording paper being used is within the specification.
Error Code 15
Eject jam during printing
Recording paper is not able to be ejected since it is longer than 840 mm when ejecting the paper
after occurrence of the error 17.
User Check
- Remove the jammed paper.
- Check whether the recording paper being used is within the specification.
Paper Jam
LCD
Step Cause Solution
1 Registration actuator caught on
the surrounding parts
Set the registration actuator into place.
2 Registration sensor defective Replace the registration sensor PCB ASSY.
3 Switchback actuator caught on the
surrounding parts
Set the switchback frame ASSY into place.
4 Sensor relay PCB defective Replace the sensor relay PCB ASSY.
5 Main PCB defective Replace the main PCB ASSY.
Paper Jam
LCD
Step Cause Solution
1
Foreign materials in the recording
paper path
Remove foreign materials.
2 Main PCB defective Replace the main PCB ASSY.
To Next Page
Loading...
Need help?
General
