Brother MFC-J425W - Page 208

USB cable scanning
199
12
Setting the new default (For MFC-J625DW/J5910DW) 12
a Press (SCAN).
b Press a or b to choose Scan to Media.
Press Options.
c Press a or b to choose Quality and then the quality you want to set as a new default.
d Press a or b to choose File Type and then the file type you want to set as a new default.
e Press a or b to choose Set New Default.
Press OK.
f Press Yes.
g Press Stop/Exit.
Factory reset (For MFC-J625DW/J5910DW) 12
a Press (SCAN).
b Press a or b to choose Scan to Media.
Press Options.
c Press a or b to choose Factory Reset.
d Press Yes.
e Press Stop/Exit.