GETTING STARTED
23
Turning Power On/Off
Press the Power key to turn the P-touch on.
Press the Power key again to turn the P-touch off.
Auto Power-Off Time
Feed function
The Feed function will feed 23 mm of blank tape.
Press the Shift key and then press the 預覽 key.
The message “ 執行中。” appears while the tape is fed.
• Do not pull the label coming out of the tape exit slot. Doing so will cause the ink ribbon to
be discharged with the tape.
• Store tape cassettes in a cool dark location, away from direct sunlight and high temperature, high
humidity, or dusty locations. Use the tape cassette as quickly as possible after opening the sealed
package.
Strong Adhesive Tape:
• For textured, rough, or slipping surface, we recommend using Strong Adhesive Tape.
• Although the instruction sheet included with the Strong Adhesive Tape cassette
recommends cutting the tape with scissors, the tape cutter that this P-touch is equipped
with is able to cut Strong Adhesive Tape.
Turning Power On/Off
• Your P-touch has a power saving feature which automatically turns itself off (under certain
operating conditions) if no key is pressed for a period of time. See the Auto Power-Off Time
table below for details.
• If the batteries are installed (or the P-touch is connected to an electrical outlet with the
AC adapter), the previous session’s information is displayed when the power is turned on.
With AC adapter 5 minutes
With battery 5 minutes
Feeding Tape
• Do not pull the label coming out of the tape exit slot. Doing so will cause the ink ribbon to
be discharged with the tape.
• Do not block the tape exit slot during printing or when feeding tape. Doing so will cause the tape
to jam.
To Next Page
Loading...
Need help?
General
