EDITING A LABEL
26
Selecting a Labelling Application Type
CABLE WRAP
Labels printed with this mode can be wrapped around a cable or wire.
This mode is also used to print on 熱縮套管 .
In 可彎曲式 , the text is rotated 90° counterclockwise and printed,
you can also specify the Size, Text and 連續標籤 ( 開 / 關 ).
可彎曲式
• 單位長度 : 直徑 , CAT5/6, CAT6A, COAX, AWG, 長度
• 值 : Depending on 單位長度
• 連續標籤 : 開 , 關
Text: Type in single or multiple lines of data
熱縮套管
• 長度 : 自動 , 25 - 300mm
Text: Type in single or multiple lines of data
CABLE FLAG
Labels printed with this mode can be wrapped around a cable or wire,
and both ends of the label stick together to form a flag. The text on flag
labels is printed on both ends of the label, leaving a blank space in the
middle that wraps around the cable. In this mode, you can specify 旗幟
標籤設計 , 旗幟標籤長度 , 纜線直徑 and 方向 .
• 旗幟標籤設計 : AA|AA (The same text is printed on each block.),
AA|BB (Two different texts are printed on each block.)
• 旗幟標籤長度 : 30mm, 15 - 200mm
• 纜線直徑 : 6mm, 3 - 90mm
• 方向 : (Horizontal), (Vertical)
When using 熱縮套管 :
•Press CABLE WRAP key. The screen to select the type of tape is displayed. Select 熱縮
套管 by using or key and then input text.
• Only the length of tape can be set when 熱縮套管 is selected. Margin setting is fixed to 不
裁切 .
Horizontal Vertical
Flag
length
Cable
diameter
Flag
length
Flag
length
Cable
diameter
Flag
length
You can enter up to two 條碼 when (AA|AA) is selected in flag layout.
To Next Page
Loading...
