25
Selecting a Labelling Application Type
EDITING A LABEL
EDITING A LABEL
You can select six different types of labelling applications by
pressing a label application key. The label application type you
selected is shown in the LCD display.
GENERAL
Labels printed with this mode can be used for general purposes. In this
mode you can specify 長度 and 方向 .
• 長度 : 自動 , 25 - 300mm
• 方向 : (Horizontal), (Vertical)
FACEPLATE
Labels printed with this mode can be used to identify various faceplates.
Block of text is evenly spaced on a single label. In this mode, you can
specify 長度 , 方向 and 段落數 .
• 長度 : 50mm, 25 - 300mm
• 方向 : (Horizontal), (Vertical)
• 段落數 : 1, 1 - 5
Selecting a Labelling Application Type
123
Keys Type Usage
1 GENERAL Prints general purpose labels. (See page 25.)
Shift+1 FACEPLATE Prints faceplate labels. (See page 25.)
2 CABLE WRAP
Prints labels that wrap around a cable and Heat Shrink
Tube. (See page 26.)
Shift+2 CABLE FLAG Prints cable flag labels. (See page 26.)
3 PATCH PANEL
Prints labels for a row of ports on a patch panel.
(See page 27.)
Shift+3
PUNCH-DOWN
BLOCK
Prints punch-down block 2-line labels. (See page 27.)
• When you change or reset a labelling application type, the text typed in is automatically used
in the new labelling application type except in the following cases:
- Changing from PUNCH-DOWN BLOCK is set to Horizontal or Backbone with sequenced
text
- Changing to PUNCH-DOWN BLOCK with sequenced text set to Horizontal or Backbone
• When a labelling application type is changed, the text typed in is automatically moved to the
new labelling application type by block units. Blank pages will be deleted but not the blocks.
• The new labelling application type is created for the text typed into to fit into each block.
• When the total number of blocks from the previous labelling application type cannot be divided
into the total number of blocks in the new labelling application type, the difference is filled with
empty blocks.
• When the total number of blocks from the previous labelling application type exceeds the total
number of blocks in the new labelling application type, the excess blocks are deleted.
ABCDE
Horizontal
Vertical
A
B
C
D
E
To Next Page
Loading...
