Brother P-touch E300 - Symbol Entry; Character and Frame Settings

1
2
3
4
5
6
7
8
9
35
 EDITING A LABEL
Entering 符號
Press the 執行 or 段落更換 key.
All text is deleted. All format settings are also deleted if 內容和
格式 was selected.
In addition to the 符號 available on the keyboard, there are various 符號 (including
international and extended ASCII characters) available with the 符號 function.
To enter a 符號 , use the 符號 function (see below).
Alternatively, press the Shift key and then press a key on the keyboard to enter the 符號
printed on the selected key’s upper-right corner.
Selectable “ 符號 ” are listed in the Appendix. (See page 51.)
Entering 符號 Using the 符號 Function
Press the 符號 key.
A list of 符號 categories and 符號 in that category is displayed.
Select 符號 category (標點, 數學, etc.) using the or key or by pressing the 符號 key
repeatedly, and then press the 執行 or 段落更換 key.
Select a 符號 using , , or key and then press the 執行 or 段落更換 key.
The selected 符號 is inserted into the line of text.
Using 常用符號儲存
You can create your personal category of 符號 by using the 常用符號 . The “ 常用符號 ” will
appear first when selecting the 符號 to help you locate the desired 符號 quickly.
Press the 設定 key to display the Setup menu, and then select “ 常
用符號儲存 ” using the or key.
Press the 執行 or 段落更換 key to display the 常用符號儲存
screen, and then select “ 是 ” to create your personal category by
using the or key.
Press the 執行 or 段落更換 key to apply the setting.
The screen returns to the text entry screen.
• Press the 取消 key to return to the text entry screen, without
erasing (or clearing) text or format.
• When 內容和格式 is selected, all the texts and fonts are cleared.
3
Entering 符號
1
2
3
When selecting 符號 :
•Press the Shift key and 符號 key to return to the previous page.
•Press the 符號 key to go to the next page.
Press the 取消 key to return to the previous step.
1
2
3