EDITING A LABEL
38
Setting 外框
You can select the 外框 of the label by using the 字形 key. Selectable “ 外框 ” are listed in the
Appendix. (See page 55.)
Press the 字形 key. The current settings are displayed.
Select an attribute using the or key, and then set a value
for that attribute using the or key.
Select an attribute using the or key, and then you can select
外框 by using the or key.
Press the 執行 or 段落更換 key to apply the settings.
Setting 外框
New settings are NOT applied if you do not press the 執行 or 段
落更換 key.
•Press the 取消 key to return to the previous step.
•Press the 空格 / 轉換 key to set the selected attribute to the default value.
• Refer to the Setting Options table for a list of all available settings.
To Next Page
Loading...
