LABEL PRINTING
42
Attaching Labels
Printing Multiple Copies
Using this function you can print up to 50 copies of the same label.
Make sure that the appropriate tape cassette is inserted and ready for printing.
Press the Shift key and then press the 列印 key to display the 份數 screen. Then select
the number of copies to be printed using the or key.
Press the 執行 or 段落更換 key. “ 正在列印。” is displayed while
the labels are being printed.
If necessary, trim the printed label to the desired shape and length using scissors.
Peel the backing from the label.
Position the label and then press firmly from top to bottom with your finger to attach
the label.
Hold down the or key to change the number of copies faster.
•Press the 取消 key to return to the previous step.
• The figures shown on the screen during printing indicate the “count / number of copies set”.
• Pressing the 空格 / 轉換 key when setting the number of copies resets the value to 1, the default.
• When the message “ 裁切並繼續 ” is displayed, select one. For details, see “Selecting how tape
is fed and cut” on page 40.
Attaching Labels
• The backing of some types of tapes may be pre-cut to make it easier to peel the backing.
To remove the backing, simply fold the label lengthwise with the text facing inward, to expose
the inside edges of the backing. Next, peel off the backing one piece at a time.
• Labels may be difficult to attach to surfaces that are wet, dirty, or uneven. The labels may peel
off easily from these surfaces.
• Be sure to read the instructions provided with Fabric Iron-On Tapes, Strong Adhesive Tapes or
other special tapes, and observe all precautions noted in the instructions.
• Please use scissors to cut 熱縮套管 .
To Next Page
Loading...
