31
EDITING A LABEL
Entering a Serialize Label
Advanced
Enter text.
Example: Create a label “1A-A02”, “1A-A03”, “1A-A04”,
“1A-B01”, “1A-B02”, “1A-B03”, “1A-B04” from “1A-A01”
by using this function.
Press the Shift key and then press the Serialize key. Select “ 進
階 ” by using the or key and press the 執行 key.
Select the first character(s) that you want to increase by using
the , , or key and press the 執行 or 段落更換 key twice.
Example: Select 1 of A01.
Select 遞增 and 計算 by using the or key and set the value
by using the or key. Press 執行 or 段落更換 key.
Example: When you want to increase the number by one four
times, set 遞增 : 1, 計算 : 4.
Select the second number that you want to increase by using
the , , or key and press the 執行 or 段落更換 key twice.
Example: Select A of A01.
Select 遞增 and 計算 by using the or key and set the value
by using the or key.
Example: When you want to increase the number by one twice,
set 遞增 : 1, Count: 2.
Press the 執行 or 段落更換 key to display the screen that you set.
Example:
You cannot select the first character(s) as it is greyed out.
• When you press the Shift key and then press the Serialize
key, you can repeat the setting. After repeating the setting,
the message “ 確認在這個動作後，覆蓋所有資料 ?” is
shown. If it’s ok to overwrite, press 執行 key.
• You can select 全部 / 當前畫面 / 範圍 when printing as there
are multiple pages of labels.
• To print labels refer to “LABEL PRINTING” on page 41.
To Next Page
Loading...
