33
EDITING A LABEL
Entering and Editing Text
Use 倉頡 to enter texts.
Input radicals, and convert Chinese characters word by word.
Example " 仲 "
Under 倉頡 input method, type .
To clear inputted texts word by word, press 倒退 key.
To clean all inputted texts, press 取消 key.
Press 空格 / 轉換 key.
Press 空格 / 轉換 key or 、 、、or key to convert Chinese characters, and then
press " 仲 ".
Press 執行 key.
" 仲 " will be inputted.
Use 簡易倉頡 input Method to enter texts
This method is to input the first and last radicals of 倉頡 , and then convert optional
Chinese characters. Follow the steps below to convert Chinese characters word by word.
Example " 虎 "
Under 簡易倉頡 input method, type .
" 卜弓 " will be displayed in reverse, and at the same time the
optional characters will appear on the screen. If you convert
a Chinese character, it will be confirmed when you input next
character.
Press 空格 / 轉換 key or , , or key to convert Chinese
characters, and then press " 虎 ".
Press 執行 key.
" 虎 " will be inputted.
• You can convert up to 25 uncertain Chinese characters at one time.
• Once confirmed, you can't convert them.
• If you want to stop converting Chinese characters, please press 取消 key.
• Before converting Chinese characters, if you press 取消 key, the inputted character will
be cleared immediately and return to the initial input state.
• This product has learning function, can display Chinese characters on priority.
• You can input up to 5 Chinese character radicals at one time. If you want to enter a
group of characters, please press 空格 / 轉換 key to convert Chinese characters, and
then enter the next character.
To Next Page
Loading...
