Measuring Ampifier Type 2525
User Manual Vol.1
Brüel & Kjær
4–8
Chapter 4 –The Menus
Main Set-up
The Large Digits option causes the selected Display Set-up read-out to appear in a
large format on the screen.
DIGITS + SELECT The display appears as shown in Fig.4.3.
Fig.4.1 Display Mode option Digits + Bar-graph selected
Fig.4.2 The Display Mode option Large Digits selected
Fig.4.3 The Display Mode Digits + Select selected
AC out:100 mV/ms
-2
Addressed
Mode: Acceleration
.
.
.
.
Upp. freq. lim 10 kHz
Low. freq. lim 0,1 Hz
Upp. 20dB
Remote
RMS
Ch. 1
0
100 pC 159 Hz Ref Off
Set-up: 1
110.1
Digits + bar graph
1
.
0
0
941378e
ms
-2
ms
-2
Remote Addressed
Upp. 20dB
Ch 1 RMS
Set-up: 1
Large digits
1.00
941379e
941414e
159 Hz Ref Off
Channel reset
Reset detectors
Input gain: – 20 dB
Output gain: 20 dB
Autorange: Off
Upp. freq. lim 30 kHz
Low. freq. lim 0.1 Hz
Mode: Velocity_
Next measure par.
To Main set-up
AC out:100 mV/ms
–1
*
>
Ch. 1
100
RMS
Remote
Unsettled
mm/s
–1
– – – –
REF GEN
Addressed