55
ZTKS0164 / Z31949 / 06
7 Maintenance
Maintenance must be performed only with approved qualification. In case of doubt
contact Bruker Service. For contact information see page 7 of this document.
7.1 Safety
Approved Persons
Bruker Service, Approved Customer Personnel
Personal protective equipment
Protective goggles
Protective gloves
Safety shoes
7.2 Cleaning
• Clean the RT vessel of the magnet system and the magnet stand with a dry or
slightly damp cloth.
• Only use water and neutral detergents.
• Do not use volatile cleaning solvents.
WARNING
Magnetic Field (see page 17)
Cryogenic Agents (see page 18)
Electricity (see page 18)
Gas under Pressure (see page 19)
Low Temperatures (see page 20)
Spontaneous Ignition and Explosion (see page 20)
To Next Page
Loading...
