Bruker 700'54 Ascend - Cycling Assignment and Shim Currents; Table 9.20: Cycling Assignment and Shim Currents

78
ZTKS0164 / Z31949 / 06
Technical Data MS 700‘54 Ascend
_ _ _ʹ_ _ _ʹ_ _ _ _
9.18 Cycling Assignment and Shim Currents
Cycling is recommended only for magnet systems at 500 MHz and more.
Shim Currents Value Unit
Shim current rate A/min
Z
1
Shim current A
Z
2
Shim current A
Z
3
Shim current A
X Shim current A
Y Shim current A
XZ Shim current A
YZ Shim current A
XY Shim current A
X
2
–Y
2
Shim current A
Frequency change due to cycling kHz
Date and Signature
Table 9.20: Cycling assignment and shim currents
This page
wi
ll be
r
ep
l
aced
by specif
i
c
te
c
hnical data.