Additional programming options
8
Logamatic 4211 - Subject to technical modifications.
51
z Select a heating circuit (Æ Chapter 7.6).
Example: Heating circ. 2
z Select the standard program for the chosen heating circuit (Æ Chapter 7.10)
(here: "Program select. Family").
Release "Prog" key to enable the selected standard program (here: "Family
program").
The display shows the selected standard program.
Turn the rotary selector once anti-clockwise, until "New switch.point" is
displayed.
The display shows the blank screen "New switch.point" for the new switching
point.
Hold down "Weekday" and turn the rotary selector to the required day
(here: "Friday").
You can select days individually or in blocks:
– Monday – Thursday
– Monday – Friday
– Saturday – Sunday
– Monday – Sunday
Release "Weekday" to save your input.
Hold "Time" down, and select the required time with the rotary selector
(here: "10:00").
"Friday at 10:00" is now set as the new switching point.
Release "Time" to save your input.
Hold "Temp" down, and select the required temperature with the rotary selector
(here: "17°C").
The display shows the set value.
Release "Temp" key to save your input.
To Next Page
Loading...
