2007 Buell Firebolt: Maintenance 1-37
HOME
Setting Rear Shock Compression
Damping
1. See Figure 1-34. In order to access the rear shock com-
pression adjuster pull back the left rear corner of the
rider seat.
2. See Figure 1-35. Using a screwdriver, turn the slotted
dial clockwise until it stops. This is the maximum com-
pression damping setting.
3. Then turn the dial counterclockwise the recommended
amount specified in Table 1-10.
Figure 1-34. Accessing Rear Shock Compression
Adjuster
Figure 1-35. Rear Shock Compression Adjustment
To Next Page
Loading...
