Setting up a printer on Windows 2000
1
2
Refer to your printer’s manual to install the printer driver.3
Double-click [My Network Places (*)] -[Entire Network] - (the TeraStation Server Name).4
* On Windows NT 4.0 this is [Network].
5
6
7
8
You have added a printer.
Click [Enable].1
Click [Save].2
Double-click on the TeraStation’s printer icon (“lp”).
Click [OK].
Click [Yes].
In the Web Admin interface, navigate to [Extensions] -
[PrintServer] and click [Modify Settings]..
Select your printer. Choose the manufacturer on 1
the left and the model on the right. If your printer
is not listed, click [Have Disk] and follow the printer
manufacturer’s directions for installation.
Click [OK].2
To Next Page
Loading...
