4
Note:
Deleting and adding groups repeatedly may cause quotas to not work properly.
5
6
Click [Shared Folders] - [Folder Setup]. 7
Click [Create Folder].8
9
Congure the desired settings.1
Click [Access Restrictions].2
Enter [Group Name], [Group Id] and [Description].1
Note:
The group ID may be any number from 1000 and 1999. Do not duplicate
Group IDs.
Click [Enable] for [Group Quota].2
Enter the stotal space that the group can use in the Hard Limit (GB) eld.3
Select users from step 2 in [Local User], and click [Add] for each. 4
Click [Save]. 5
Click [Users/Groups] - [Local User].1
Select a user from step 2, and click [Edit User].2
Select the group created in step 4 for [Primary Group] and click [Save].
To Next Page
Loading...
