YAK 130
BVM ©2016 45 Mar. 23, 2016
Gyro Mount
Assemble the Gyro Mount. A 90 block is
handy to achieve the proper angle. Work on
a piece of wax paper or food wrap.
Apply a Zap finish to the top of the Gyro
Mount.
A Demon Aero Cortex Gyro is shown here.
BVM includes additional instructions with this
unit.
Glue the Gyro Mount to the fuse and the
front side of the front Nose Gear former as
shown. Use adhesive backed Velcro or the
mounting tape that is supplied with your
Gyro. For added security, use a 6” piece of
1/2” Velcro strap.
To Next Page
Loading...
