BVM Yak 130 - BVM Products; Recommended Accessories

YAK 130
BVM ©2016 4 Mar. 23, 2016
BVM Products
Received with the Instruction Package that is sent from BVM
Laser Cut Ply U.A.T. Tray
Laser Cut Ply Gyro Mount
#2 Button Head Screws
Carbon “L” Bracket
#10 Screws to replace Turbine Mounting Screws
8” Tie Wraps for Equipment Board
4” Tie Wraps for Wires and Air Lines
Yak-130 Construction and Operation Manual
Laser Cut Ply Alternate Rear Service Mount
Recommended Accessories
Available at BVMJets.com
You may have some of these products in your shop, but if not, refer to this list.
 Spektrum 12120 Power Safe Receiver
 Spektrum X-Plus 8 Expansion Module
 Demon Aero Cortex Gyro
 2 x 7.4v Batteries 3000 mAh each.
 140N engine of your choice.
 BVM UAT BVM 6044
 BVM Velcro Package PA-SR-0081
 Perma-Grit Rotary Rod (coarse) RF-6C
 PermaGrit Sanding Strip FXT-103
 BVM “O” Clips PA-SR-0026
 Wire Loom PA-SR-0036
 BVM Over Flow Tank BVM 6047
 Flush Mount Vent Fitting PS-SP-0301
(For Over Flow Tank)
 Flush Mount Vent Plug PS-SP-0302
(For Over Flow Tank)
Velcro Package
BVM Ultimate Air Trap