YAK 130
BVM ©2016 43 Mar. 23, 2016
Nose Wheel
Nose Wheel Axle Assembly
It will require (2) 2mm hex wrenches to
remove and re-assemble the Nose Wheel
for similar lubrication on the axle and
bushings.
Use the BVM Thin Lube for “O” Rings kit
(BVM# 1945) on the strut cylinders.
The BVM Thin “O” Lube is the only lube that
should be used for any pneumatic system.
Inject a few drops into the Air Fill Valve
occasionally to keep the system “wet”.
The BVM Jets Dry Lube (BVM# 1947 works
well on all moving joints of the landing gear
system.
To Next Page
Loading...
