74
Replacing/ removing the Motherboard Battery
The European Parliament and EU Council have set the goal of reducing the amount of Waste Electrical and Electronic Equipment (WEEE)
going to landfill and reducing the hazardous substance content of Electronic and Electrical Equipment (EEE).
Please follow the following steps to decommission your flame photometer prior to recycling
1. Gain access to the instrument enclosure as previously
described.
2. Locate the battery on the motherboard.
3. The battery is held in place with a light spring, one
edge of the black surrounding ring is open to allow
finger access, carefully prise the battery away from
the spring and remove it from the black ring.
4. The battery can now de disposed of in a safe manner
or replaced as required.
5. Reassemble in reverse order.
To Next Page
Loading...
