19
EN
Installation check
properly connected.
Press
START CHECK
to begin.
Following screen:
Waste water connection in accordance with
EN 1717
If you are sure that all the points have been met,
you can skip the check.
To do so, press
SKIP.
Following screen:
Registration
Installation check 1/4
Check the waste water hoses are connected
properly.
Press
INSTALLED
Following screen:
Connection on the Multiblock
Installation check 2/4
Check the hoses for hard and softened water on
the Multiblock are connected properly.
Open the Multiblock by turning the handwheel
anti-clockwise until it stops. Rinsing of the device
starts.
Press
INSTALLED
Following screen:
To Next Page
Loading...
