system, the head restraint can be
adjusted or removed.
●
When the child restraint is installed
on the rear outboard seat with a top
tether:
●
Remove the cargo cover to have
access to the top tether anchorage
and store the cover safely in the
vehicle, and;
●
Route it at the outside of each head
restraint rod.
WARNING
●
When a child restraint is a booster
cushion only, without a seatback,
WARNING
the head restraint must never be
removed, and must be positioned
at the appropriate height.
Details on child restraint system
installation locations:
●
① Driver seat
●
② Front passenger seat
●
③ Rear left seat
●
④ Rear centre seat
●
⑤ Rear right seat
CAUTION
●
The illustration indicates seat
positions for a LHD model.
For RHD model, the front seat
reference positions are switched.
The following table shows the installation
options for ISOFIX or i-Size child restraint
system at the ISOFIX or i-Size anchorage
points of the individual vehicle seating
locations.
27
01
SAFETY
To Next Page
Loading...
