11cab Produkttechnik GmbH & Co KG
Compliances
The device complies with the following safety regulations :
CE : The printer complies with the following safety requirements
- EC Low Voltage Directive (73/23/EEC)
- EC Machinery Directive (98/37/EEC)
- EC Electromagnetic Compatibility Directive
(89/336/EEC)
FCC : The device complies with the requirements of the FCC
regulations part 15 for class A computers. Under
disadvantageous circumstances, the operation of these
devices may cause interference with radio or TV reception,
which has to be eliminated by the operator.
Instructions for the Lithium Battery
The PCB of the printer is equipped with a Lithium battery.
Take necessary precautions against a possible short circuit if the battery is not
fully discharged. Properly remove the battery should the printer be scrapped.
WARNING !
This is a Class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate
measures.
1. Product Description
To Next Page
Loading...
Need help?
General
