©2023 CAE 905K600152 v1.4 31
Setup
SETUP
This section provides instructions and guidelines to unpack, charge and turn on the manikin. It also
provides instructions on how to charge and power on the Instructor tablet.
Unpacking the Manikin
The manikin comes in a custom-designed container that provides proper placement for all parts and
accessories.
Follow the guidelines below when opening your shipment:
• Refer to the Unpacking Your CAE Manikin document provided in the shipping container.
• Exercise extreme caution when using sharp objects, such as a box cutter. A damage
d
contai
ner can lead to improper storage of the manikin, potentially damaging
skin, body
part
s, and accessories.
• Reserve a space approximately 2 ft by 6 ft (61 cm by 183 cm) to store the shipping
container before and after use. For more information, see the Care and Maintenance
section of this user guide.
• Read and understand the Cautions and Warnings located in the beginning of this user
guide.
• Follow the sequence of the steps carefully. Complete all steps in order.
• Do not power on any components until instructed in the text.
• Verify the content of each item in the container against the shipping paperwork to ensu
re
you
received the correct product and parts.
•
Ke
ep original shipping materials, including boxes and foam. Warranty and repair item
s
must be returned and shipped in their original packaging.
Setup Steps
The following instructions and guidelines inform users how to assemble the simulator and configure
the instructor laptop.
To ensure that the manikin is ready for setup and prevent damage to your simulator, it is important
to complete the preparation steps as instructed.
To Next Page
Loading...
