©2023 CAE 905K600152 v1.4 91
Care and Maintenance
Storage
IMPORTANT: Do not attempt to open or repair any simulator components. Doing so may void the
warranty. If damage exists, contact CAE Customer Service immediately for a repair. Prompt repair
prevents expansion of the damaged area.
Prior to storing the product:
• Make certain all fluids have been flushed and drained from the manikin.
• Charge the manikin batteries.
Store all equipment and the manikin:
•Indoors
•In a dry location
•Protected from dust
• Away from direct sunlight
• Within the temperature ranges listed in the Specifications section of this user guide.
Refer to the following short-term and long-term storage instructions for additional details.
Short-Term Storage
Follow these guidelines for short-term storage (less than one month):
• Charge the manikin to 60 to 80% to increase shelf life.
• Store the manikin on a work table and cover with a sheet.
• Store the manikin and battery in a cool location to extend the life and capacity
of the
bat
tery.
Long-Term Storage
Follow these guidelines for long-term storage (more than twelve months):
Always charge the battery before storage. Charge the computer and manikin to 100% in order to
maximize shelf-life. Follow the Battery Safety Information detailed in this User Guide. Using a
screwdriver, disconnect the batteries from the manikin to avoid overly drained batteries.
Juno supports Battery Storage Mode for long-term storage. To enable:
1. Start Maestro, tap the Gear icon, and select System.
2. Tap on the Maintenance tab.
To Next Page
Loading...
