©2023 CAE 905K600152 v1.4 3
Cautions and Warnings
Battery Replacement
• If the simulator battery power diminishes significantly, contact Customer Service to
replace the battery. For safety, only replace the battery with an approved make and
model.
•
Be
fore disposing of a simulator battery, apply vinyl tape to its positive (+) and negative (-
)
terminals to
avoid short circuits.
• If a simulator battery needs to be replaced, immediately remove the old battery from the
equ
ipment to ensure no damage occurs.
•
Do no
t dispose of the simulator battery into a fire. Dispose of or recycle batteries
responsibly.
Battery Safety Information
For information about battery specifications, see the Specifications section of this user guide.
Important: Refer to the battery manufacturer’s Safety Data Sheet (SDS) for complete safety
instructions and handling information.
Precautions for Handling
Hazards are associated with the contents of the cell or battery. Under recommended use conditions,
the electrode materials and liquid electrolyte are non-reactive, as long as the cell or battery integrity
remains, and the seals remain intact.
Potential exposure should not exist unless the cell or battery:
• leaks,
• is exposed to high temperatures,
•
is mec
hanically, electrically or physically abused/damaged.
To Next Page
Loading...
