EasyManua.ls Logo

CAE Juno - Page 69

Default Icon
101 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
©2023 CAE 905K600152 v1.4 63
Using Juno
To perform IV administration, learners will need:
Empty IV bag with IV tubing connected
Red food coloring (if you want to make simulated blood)
20 gauge IV catheter
Alcohol swab
IV Dressing
•Extension tubing
Full IV bag with distilled water (or red colored distilled water) with IV tubing connected
•IV pole
To practice IV administration:
To prepare the IV site for flashback and aspiration, identify the ports that prime and drain the IV site
on the left side of the manikin. One tube will be for priming, the other for drainage.
The yellow tubing is for the Dorsum IV site, and the clear tubing is for the Antecubital IV site.
IV Tubing
To begin an IV drip:
1. Connect the end of the drain port tubing to the IV tubing and an empty IV bag.
2. Open the clamp on the IV tubing.
3. Fill an IV bag with water, or with water mixed with food coloring to simulate blood. Close
the clamp on the IV tubing.
Dorsum of the
hand IV tubing
Antecubital
Fossa IV tubing

Table of Contents

Related product manuals