AVALON GALLERIA Rev. 8 04/2013
www.cafection.com (800) 561-6162
44
INSTALLATION AND SERVICE MANUAL for AVALON Galleria and Quatro
Preventive Maintenance
6.2 Brewer assembly
PM: Yearly or every 25,000 coffee cycles
The brewer is the heart of the equipment and is responsible for the taste in the cup. It needs
to be serviced regularly to maintain the quality of the beverages served. We recommend
having your brewer assembly swapped with a new one that you have on hand and returned
to Cafection for Preventive Maintenance every 25,000 coffee cycles. For a minimum charge,
CAFECTION will completely clean and replace all necessary parts such as the cylinder, the
piston seal and the screen and seal which are all responsible for the vacuum extraction and
coffee taste in the cup. It will then be returned with a 1 year warranty against defective parts.
Contact CAFECTION for parts and additional instructions.
Inspection
The following are signs of the vacuum is not functionning adequately and that your brewer
may be due for preventive maintenance:
• if the seal is damaged;
• if air gets into the cylinder and creates bubbles in the coffee;
• if there are coffee grounds in the delivered product;
• if the spent coffee grounds remain wet.
Screen and seal
Cylinder
Piston seal
Brew
chamber
To Next Page
Loading...
