How to fix damage to painted areas surrounding the battery in Calix ODC-10?
To address damage to painted areas surrounding the battery in your Calix Enclosure, remove any rust and dirt from the affected area. Then, apply touch-up paint to prevent future corrosion.
What to do if Calix Enclosure battery has physical damage?
If you notice physical damage, leakage, or bulging of the battery in your Calix Enclosure, replace the defective battery before placing the batteries back in service.
How to clean dust, dirt or corrosion from the battery surface of Calix ODC-10?
If you find dust, dirt, or corrosion on the battery surface of your Calix Enclosure, clean the batteries to remove these substances.
What to do with corroded or malfunctioning battery terminals in Calix ODC-10?
To address corroded or malfunctioning battery terminals in your Calix Enclosure, apply an oxide inhibiting grease to all terminals before reconnecting the batteries.
General| Material | Polycarbonate |
|---|---|
| Mounting Type | Wall |
| Operating Temperature | -40°F to 140°F |
| Ingress Protection | IP66 |
| Type | Optical Distribution Cabinet |
| Capacity | Up to 144 fibers |
To Next Page
