14
Calix ODC-10 Installation Guide
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
© 2001-2003 Calix. All Rights Reserved.
Procedure to close the roof of the cabinet
Step Action
1.
Hold the front edge of the roof and press the release
button on the support arm, then lower the roof.
2.
Open the front and side cabinet doors to access the underside of the roof
overhang.
3.
Locate the retaining bolt holes in the front of the roof overhang, then insert
the bolts and tighten them using a 5/16" allen wrench.
An allen wrench is provided with the cabinet.
To Next Page
Loading...