CAN CHECKED MFD28 Gen2 User Manual

Rev 1.0
29
If the check mark is set at the first selection field, all pages of your data display are imported into the
DSS. During the import of the pages, your display automatically switches through all pages. Only if
this check mark is set, you can call up an overview of all pages in the Pages tab. More on this in
chapter 9.3
If the second selection field is checked, the TRI Editor is emptied before the sensors are imported
from the data display. Attention: Only remove this check mark if you know what you are doing. If
the check mark is not set here, it can happen that there are duplications in the TRI Editor and in the
worst case you make your TRI/TRX file unusable.

CAN CHECKED MFD28 Gen2 Specifications

General

Brand	CAN CHECKED
Model	MFD28 Gen2
Category	Monitor
Language	English