9.3 Pages
In this tab you can adjust the individual pages of your data display. If you have ticked both boxes
when establishing the connection, you will get an overview of all pages created on your data display
by clicking on the Pages tab and can also switch from here to the individual view of the pages by
clicking on them. In addition to hiding individual pages in the display setup on the data display itself,
you can also hide or make visible the pages in the overview page by ticking the box.
Figure 26: Pages overview page with hidden pages
If the check mark for loading all pages was not set when connecting, you will land directly on the
single view and must manually load the currently active page into the DSS by clicking on import from
display.
Figure 27: Pages single view with button
To Next Page
Loading...
Need help?
General