CAN CHECKED MFD28 Gen2 User Manual

Rev 1.0
52
The menu items start angle and end angle refer to min value and max value and are, as already
specified in the round meter in degrees, where 0 degrees is at 12 o'clock. For example, if you want a
classic "6 o'clock speedometer" your min value is 0 and the start angle is -180.
As already known from the round meter, there is also a split-seconds pointer in the needle widget.
This is configured via the menu item ghost time.

CAN CHECKED MFD28 Gen2 Specifications

General

Brand	CAN CHECKED
Model	MFD28 Gen2
Category	Monitor
Language	English