Furthermore, the MFD28/32 Gen2 has a frequency input. With this you can separately feed wheel,
engine or turbocharger speed (5V square wave signal) or the ethanol content of your fuel into the
display. Pin B5 or B10 can be used for these applications. More information can be found 9.5.6 9.5.6.
Some settings can be implemented directly via the display. For detailed configuration or the creation
of your own pages, the use of DSS (Display Setup Software) is necessary. The download is free of
charge at https://www.canchecked.de/downloads-category/dss-display-setup-software/. The
display is connected via the supplied USB cable. We recommend leaving it connected to the display
and hiding the USB plug in an easily accessible place. In this way, easy access to your data display is
possible at any time without disassembly. The glove compartment, the side covers of the dashboard,
or the trim of the central consoles have established themselves here.
In the meantime, we have produced illustrated installation instructions for numerous vehicles. These
can be found on our website under www.canchecked.de/help/einbauanleitungen/. If you have a
CANchecked data display with a plug-and-play OBD data cable, it is recommended to connect it
briefly with the data display to the OBD socket before final installation behind the fairing in order to
check the correct connection and familiarize yourself with the user interface.
To Next Page
Loading...
Need help?
General