Canon imageclass MF232W - Page 301

Waiting Time for Connection at Startup
Specify a wait time for connecting to a network. Select the setting depending on the network environment. Setting a
Wait Time for Connecting to a Network(P. 210)
0 to 300 (sec.)
Ethernet Driver Settings
Select the communication mode of Ethernet (half-duplex/full-duplex) and the Ethernet type (10BASE-T/100BASE-TX).
You can also view the MAC address of the machine.
Auto Detect
Select whether to automatically detect or manually select the communication mode and the Ethernet type.
Conguring Ethernet Settings(P. 207)
Off
Communication Mode
Half Duplex
Full Duplex
Ethernet Type
10BASE-T
100BASE-TX
On
MAC Address
Check the MAC address of the machine, which is a number unique to each communication device. Viewing
the MAC Address for Wired LAN(P. 193)
IEEE 802.1X Settings
Enable or disable IEEE 802.1X authentication.
Conguring IEEE 802.1X Authentication(P. 251)
Off
On
Initialize Network Settings
Select to return the Network Settings to the factory defaults.
Initialize Menu(P. 337)
Setting Menu List
295