2
Spread the document guides apart.
● Slide the document guides outward until they are slightly farther apart than the actual document width.
3
Fan the document stack and align the edges.
● Fan the document stack in small batches, and align the edges by lightly tapping the stack on a at surface a
few times.
4
Place the document(s) face up in the feeder.
● Make sure that the document stack does not exceed the load limit guide ( ).
● Do not load documents of various sizes at the same time.
● Up to 35 sheets can be loaded at a time. If 35 or more sheets are loaded, scanning may stop or a paper
jam may occur.
5
Align the document guides against the edges of the document.
● Slide the document guides inward until they are aligned securely against the edges of the document.
Basic Operations
40
To Next Page
Loading...
