Printer Specications
Normal size Printable area
• Sheets ( T op Paper Feed Slot )
T op: 3 mm (0.12 in); bottom: 3 or 23 mm (0.9 in); left
and right sides: 3 mm.
• Sheets ( Front Paper Feed Slot )
3 mm (0.12 in) on top, 23 mm (0.9 in) on bottom, and 3
mm (0.12 in) on both sides
• Rolls
3 mm (0.12 in) from each side
For information on the recommended print area, see “Print
Area”. (→P .81)
Borderless printing ( *2 ) Printable area (rolls)
Entire surface
Print area
Oversized ( *2 ), ( *3 ) Printable area
Entire surface
Supported width for borderless printing 10 inches (254 mm), JIS B4 (257 mm), A3+ (329 mm), 14
inches (356 mm), 16 inches (407 mm), ISO A2/A3 (420
mm) ( *4 ), 17 inches (432 mm), JIS B2/B3 (515 mm), ISO
A1/A2 (594 mm) ( *4 ), 24 inches (610 mm)
*1: For information on the types of paper the printer supports, refer to the Paper Reference Guide .
( → P .101)
*2: Printing may not be possible in some cases, depending on the type and size of paper .
*3: Load paper at least 6 mm (0.24 in) wider and 6 mm higher than the size selected in Page Size for roll
paper . Or , load paper at least 26 mm (1.0 in) higher for the tray .
*4: Borderless printing requires the Spacer for Borderless Printing .
Printer Parts 79
To Next Page
Loading...
Need help?
General
