10. Click High (600dpi) in the F Print Quality list.
Note
• Options displayed in the F Print Quality list vary depending on the paper type.
11. Click Monochrome in the H Color Mode list.
12. To adjust the brightness and contrast, click I Set.
Note
• For instructions on adjusting brightness and contrast, see "Adjusting the Color in the Printer Driv-
er →P.55 "
13. Access the Page Setup pane.
14. Confirm the settings of A Paper Source and C Page Size.
15. Confirm the print settings, and then click M Print to start printing.
Note
• For tips on confirming print settings, see "Confirming Print Settings (Mac OS X) →P.491 "
Enhanced Printing Options
>
Adjusting Images
>
Choosing the Document Type and Printing Conditions (Mac OS X) iPF6300S
2
72
To Next Page
Loading...
