Setting Item Description, Instructions
GL2
Set-
tings
Paper
Man-
ager
Auto Rotate HP RTL print jobs are not rotated. Because HP RTL
images are not rotated even if the paper is rotated 90
degrees, images may be cut off or the blank paper
may be ejected. In this case, set Auto Rotate to Off.
Nest-
ing
Use Nesting Selecting On will store print jobs until multiple docu-
ments can be arranged to fill up the roll width, in-
stead of printing each print job as it is received.
Nesting WaitTime Specify a time to wait until printing, as desired.
Cut Lines Select On to print cut lines between each document
on the roll.
Line &
Pen
Man-
ager
Enable merge Specify whether to merge or print over colors where
lines overlap.
Choose Off to print the second line over the first.
Choose On to merge all overlapping colors.
Pen
Setup
Select Palette As pen values, choose Software, Palette A, Palette
B, or Factory.
Choose Software to print according to software set-
tings. Choose Palette A or Palette B to print using
the value specified in Define Palette.
Define Palette Specify the Width, Color, and Line Attributes in
the palette Pen no.. Choose Factory to confirm the
values when Factory is selected in Select Palette.
In Line Attributes, choose No Setting or Circle Set-
ting as the processing for the ends and junctions of
lines.
• If you choose No Setting
• If you choose Circle Setting
Reset Palette Restore Define Palette to the default palette settings.
Smoothing Choose whether to print arcs as smooth curved lines
or as multiple connected line segments.
Printer Parts
>
Control Panel
>
iPF655 Menu Settings
9
721
To Next Page
Loading...
Need help?
General