Setting Item Description, Instructions
GL2
Set-
tings
Line &
Pen
Man-
ager
Smoothing
• If you choose Software
Operation is determined by the application. If
nothing is specified by the application, the result is
as shown in the figure.
Note: By default, this is a 72-sided figure
• If you choose Smooth
ThickenFineLines Select On to print fine lines more distinctly.
AdjustFaintLines If fine lines are printed in colors that do not match the
colors of other shapes, selecting Off may help pro-
duce the expected results. However, lines in some
colors may appear broken.
Proc-
essin-
gOp-
tion
Warning Select On to have any GL2-related warnings dis-
played.
On-the-Fly Selecting On will start printing jobs sooner if you are
printing only HP RTL print jobs and printing would
not start until later. However, images may be incom-
plete in some cases, so be sure to check the printing
results.
PageSizeProcess1 Normally, the area available for printing excludes a
margin required by the printer, and images are posi-
tioned accordingly. Selecting On in this setting elimi-
nates any misalignment of the printing position if the
image itself includes a border.
PageSizeProcess2 Selecting On will determine the paper size based on
the image rendering area.
GL2 Set Print Print GL2 settings information.
Inter-
face
Setup
EOP Timer Specify the timeout period before cancellation of
print jobs that cannot be received by the printer.
TCP/
IP
IPv4 IPv4 Mode Choose whether the printer IP address is configured
automatically or a static IP address is entered man-
ually.
Printer Parts
>
Control Panel
>
Menu Settings iPF655
9
722
To Next Page
Loading...
Need help?
General