5. Remove the Printhead and press the OK button.
Note
• Dispose of the used Printhead in accordance with local regulations.
6. Holding the new Printhead by the grips (a), remove it from the pouch.
Important
• When handling the Printhead, always hold it by the grips (a). Never touch the nozzles (b) or metal
contacts (c). This may damage the Printhead and affect printing quality.
• Never touch the ink supply section (d). This may cause printing problems.
• If you need to put a Printhead somewhere temporarily before installation, do not keep the nozzles and
metal contacts facing down. If the nozzles or metal contacts are damaged, it may affect the printing
quality.
Maintenance
>
Printheads
>
iPF655 Replacing the Printhead
11
801
To Next Page
Loading...
Need help?
General