Canon imagePROGRAF iPF8400 Service Manual

Chapter 7
7-31
3.3 Service Mode Menu Tree
* Press key to move to the next menu of the same layer, and press key to move to the menu of one layer deeper.
* The menus shown in '*1' are the e-RDS-related menus.
3.4 e-RDS Related Setting Details
1) e-RDS's Operation Mode [E-RDS SWITCH]
In service mode, referring to the "Service Mode Menu Tree", go to [E-RDS SWITCH] menu using key and key.
(1) Choose between [ON] or [OFF] using the and keys.
F-7-29
(2) Press [OK] key to determine the operation mode and go back to the previous screen.
F-7-30
- When the operation mode is determined, "=" will be displayed.
- OFF: When it is set to [OFF], e-RDS is not used. Default value is OFF.
- ON: When it is set to [ON], e-RDS is used.
First Level Second Level Third Level Fourth Level Fifth Level Sixth Level
DISPLAY
I/O DISPLAY
ADJUST
FUNCTION
REPLACE
COUNTER
SETTEING Pth
RTC
PV AUTO JUDGE
NETWORK CERTIFICATE CA-CERTIFICATE VALIDITY:*1 yyyy/mm/dd
E-RDS E-RDS SWITCH:*1 ON/OFF
UGW-ADDRESS:*1 http://XXX
UGW-PORT:*1 XXXXX
COM-TEST:*1 YES
COM-LOG:*1
HEAD DOT INF
INITIALIZE WARNING
ERROR
JAM
ADJUST
W-INK
CARRIAGE
PURGE
INK-USE CNT
W-INK-CHG CNT
HEAD-CHG CNT
HDD BOX PASS
PARTS-CHG CNT
PARTS COUNTER
USER SETTEING
CA-KEY:*1 YES/NO
ERDS-DAT:*1 YES/NO
JOB LOG YES/NO
OFF
E- RDS SWI TCH
=ON
E- RDS SWI TCH

Canon imagePROGRAF iPF8400 Specifications

General

Internal storage capacity	250 GB