Hard Disk
Modifying Personal Boxes
Setting Passwords for Personal Boxes
By factory default, no passwords are set for Personal Boxes. For greater security , you can set passwords for
each Personal Box. After you set a password, it will be required to modify the Personal Box settings, as well
as to display , print, delete, move, and modify jobs saved in the Personal Box.
Note
• A password cannot be set for the Common Box.
• Enter a four-digit number as the password, in the range 0001-9999.
• Even if you have set passwords, they are not required to access Personal Boxes in Administrator
Mode in RemoteUI .
Y ou can set a password for a Personal Box as follows.
• Using RemoteUI
• Using imagePROGRAF Status Monitor (Windows)
• Using imagePROGRAF Printmonitor (Macintosh)
(Using RemoteUI )
1. On the Stored Job page, select the Personal Box for a password.
2. Click Edit .
1 18 Printer Parts
To Next Page
Loading...
