Canon imagePROGRAF IPF9100 - Media Menu

Control Panel
Media Menu
Setting Item Description, Instructions
Cut Sheet T ype ( *1 ) Choose the type of sheets.
( → P .213)
Roll Media T ype ( *1 ) Choose the type of roll.
( → P .186)
Chk Remain.Roll Choose On to print a barcode at the end of a roll before you remove it. The printed
barcode can be used in managing the amount of roll paper left. Choose Off if you
prefer not to print the barcode.
Roll Length Set Displayed if Chk Remain.Roll is On .
If a barcode is not printed on rolls, specify the roll length. The roll length is displayed
in meters or feet, depending on the setting in Length Unit .
*1: For information on the types of paper the printer supports, refer to the Paper Reference Guide .
( → P .167) The paper type setting in the printer driver and related software (as well as on the Control
Panel ) is updated when you install the printer driver from the User Software CD-ROM or if you change
paper information by using the Media Conguration T ool . See the Media Conguration T ool Guide
(Windows) or Media Conguration T ool Guide (Macintosh).
Printer Parts 49