Canon imagePROGRAF IPF9100 - Regular Printing Is Selected, but a Roll Is Loaded; Roll Printing Is Selected; Roll Printing Is Selected, but Sheets Are Loaded; Sheet Printing Is Selected

Messages regarding paper
Regular printing is selected, but a roll is loaded.
Cause Corrective Action
Hold down the Stop button for a second or more to
cancel printing.
Press the OK button and remove the roll, and then
load a sheet of the paper type and size you have
specied in the printer driver .
( → P .184)
( → P .144)
A print job for printing on sheets was sent when a
roll is loaded.
Hold down the Stop button for a second or more to
cancel printing.
Change the printer driver settings to match the roll
already loaded and try printing again.
Y ou are using a roll with the Media T ake-up Unit , but
a print job requiring sheets was sent.
1. Press the Stop button for a second to cancel the
job involving sheets.
2. Choose Paper Cutting in the menu.
3. Press the Load/Eject button and remove the roll.
4. Load a sheet and resend the print job.
Roll printing is selected, but sheets are loaded.
Cause Corrective Action
Press the OK button and remove the sheet.
( → P .214)
Load a roll and try printing again.
( → P .140)
A print job for rolls was received when a sheet is
loaded.
Hold down the Stop button for a second or more to
cancel printing.
Roll printing is selected.
Cause Corrective Action
Load a roll and try printing again.Y ou have attempted to print a test print sheet or
other printer status information on a roll, but no roll
is loaded.
T o print on a sheet instead, hold the Stop button for
more than a second to cancel printing, load a sheet,
and then print. ( → P .144)
Sheet printing is selected.
Cause Corrective Action
Load a sheet and try printing again.Y ou have attempted to print a test print sheet or other
printer status information on a sheet, but no sheet
is loaded.
T o print on a roll instead, hold the Stop button for
more than a second to cancel printing, load a roll,
and then print. ( → P .140)
Error Message 769